background image

Platypus Fire Pty Ltd makers of the 

The Sensible Bushfire

Protection System

Refer to section 2 of this guide for information about bracket spacing and sprinkler pressure, flow and spacing.
All diagrams are to be used as guides only.

10

 

 

b.

 

if damage, malfunction or failure of the Sprinkler has resulted from alteration, 
accident, misuse, abuse, fire, maladjustment of customer controls, use on an 
incorrect voltage, power surge and/or dips, thunderstorm activity, acts of God, 
flood, power supply problems, tampering or unauthorised repairs by any persons, 
use of defective or incompatible accessories, exposure to abnormally corrosive 
conditions or entry by any liquid, insect, vermin or foreign object into the Sprinkler; 

c.

 

if damage  to the Sprinkler arises from or during transportation, installation (if 
installation is undertaken by a third party) or while moving the Sprinkler; 

d.

 

to any third party software or hardware not contained in the product as originally 
configured by the manufacturer. 

e.

 

to any failure of the Sprinkler that is not a failure of the Sprinkler to perform to its 
specifications. 

f.

 

 to any replacement or repair of any lost parts or accessories. 

g.

 

service of the Sprinkler while it is outside Australia. 

h.

 

to any wear and tear if the Sprinkler is used for commercial, industrial, rural, 
educational or rental purposes. 

6.2

 

Platypus is not liable for any loss or damage arising from alterations to third party hardware 
or software. 

6.3

 

Platypus is not liable for any loss or damage arising from loss of use, loss of profits or 
revenue. 

6.4

 

Platypus is not liable for any loss resulting from indirect or consequential loss or damage. 
 

7

 

TRANSFER OF WARRANTY 
 

7.2

 

This Warranty may be transferred to subsequent owners of the property on which the 
Sprinkler is installed in the event of the sale of that property. 

7.3

 

To transfer this Warranty the Purchaser must notify Platypus, in writing, within a reasonable 
time of the sale of the property of the following details: 

7.3.1

 

The name and contact details of the subsequent owner of the property; and 

7.3.2

 

The name and contact details of the previous owner of the property; and 

7.3.3

 

The date and place of purchase of the Sprinkler. 

7.4

 

The transfer of this Warranty does not extend the Term of this Warranty. 

7.5

 

The transfer of this Warranty does not alter in any way the terms and conditions of this 
Warranty. 

  

Summary of Contents for PFSS25











Reviews: