22
Installation and user guide PLATINUM Inverter 7000 R3, 9000 R3, 11000 R3, 14000 R3, 16000 R3
Initial operation
Exchange
inverter
This menu option appears only if a new inverter is detected in an
existing network. In this case, the numbers of the inverters replaced
can be used.
This must be configured on every inverter replaced.
▪
If the number displayed (of the inverter replaced) is to be used,
confirm with
YES
and continue to the next menu.
▪
If different numbering is required, choose
NO
using the
/
buttons and choose
OK
to open the menu for changing device
numbers.
Country code
Select the country required using the
/
buttons and confirm with
OK
.
Further settings may be required depending on the country. These
settings depend on the network operator.
The country code is automatically applied to all network participants.
Date
Enter the current date.
▪
Use the
/
buttons to set the digits.
▪
Use the
/
buttons to continue to the next digit.
▪
Choose
OK
to confirm the date entered.
Time
Enter the current time.
▪
Use the
/
buttons to set the digits.
▪
Use the
/
buttons to continue to the next digit.
▪
Choose
OK
to confirm the time entered.
The date and time are automatically applied to all network
participants.
The date and time must be confirmed with
OK
, otherwise initial
operation cannot be completed.
Once the date and time have been entered, the TIME SETTINGS screen appears; see
"Settings menu" on page 30.