24
TECHNICAL SUPPORT: (909) 259-6001
BLSW1016
Installation: Accessory Connections
Accessory Connections:
Inside
Outside
Open
Commands
Keypad
Fire
Override
Safety Connections
Edge Sensor
Photo
Beam
TX
Center
Loop
Detector
Safety
Loop
Detector
Photo
Beam
TX
Reopen Photo Beam
Note: Installing the photo beam in this way,
allows the gate to re-open all the way upon
obstruction of the photo-beam.
The optional PBD connector provides a
controlled power supply for Photo Beam.
The power will be turned off when gate is
in close position to save battery.
Option for
Solar Power
Input ONLY
To decrease the possibility of vehicle entrapment on the gate, vehicle
loop detectors need to be installed. The edge sensor and the photo-
electric beam can be used for secondary entrapment protection on
every installation to prevent pedestrian or animal entrapment. These
accessories must be UL325 compliant devices.
BLSW1016 Manual_Layout 1 5/8/2015 5:06 PM Page 24
