TECHNICAL SUPPORT: (909) 259-6001
ACTP715
11
Mounting Instructions
STEP 4
Mount the piston on Front and Back brackets
tightly screwing down the self-locking nut and
lubricate the turning points
.
Note:
Pay special attention to the correct
assembly of the washer on Front bracket.
Assemble and secure the drive screw cover
on the drive screw using the screws provided
.
Note:
Ensure that the drive screw is properly
assembled onto the screw cover head.
Manually move the gate and the gate operator
to ensure the free movement throughout.
When manual operation is required:
1. Insert the key and turn it clockwise.
2. Unlock the electric lock, if mounted.
3. Manually slide the gate open.
To relock the wings:
1. Turn the key counter-clockwise.
WARNING: The door wing block and release
operations must be performed with the motor
idle.
Manual Release
ACTP715 Manual_Layout 1 11/4/2014 3:53 PM Page 13