Add Speakers is used to add a new
speaker to the current system.
Remove Speakers is used to remove a
speaker from the current system.
Dolby PL2 Mode: Is used to setup the
surround mode for stereo audio.
Lip Sync Delay: Is used to synchronize the
audio and video signal from the source.
You can delay the audio to match the
video.
Enable ARC : When set it to “on”, the TV
will be active as a source.
In the speaker chime menu, If you select
one speaker, You will hear a test tone
from that speaker. This will help you to
verify if this speaker is working properly.
