Plastimo SX-350, Manual

Page: 11 / 44

9
■
Main Function Operation
◆ Select Channel Group
·
This radio contains USA, International and Canadian Channel Group.
·
In standby mode, press [MENU] key, then press [LOCK] key to switch Channel Group.
◆
Select Weather Channel
This radio has 10 weather channels.
·
In standby mode, press [MENU] key, then press [VOL/SQL] key to switch between operating
channel and weather channel.
◆ Edit CALL Channel
1. Hold [C/16] key for 1 second to select CALL Channel,
“CALL” and CALL channel number
are displayed.
2. Then hold [C/16] key for 3 seconds until two
“DUDU” sound are heard to enter CALL
Channel programming mode, channel number flashes.
3. Press [
▲
]/[
▼
] key to select desired CALL Channel.
4. Press [C/16] key to confirm and save CALL Channel.
◆
Set/Cancel TAG Channels
Set TAG (
★
) for channels need to be scanned, cancel TAG (
★
) for channels which are no
need. The untagged channels will be skipped during the scanning.
·
Set/Cancel Single TAG Channels: Hold [MENU] key for 1 second to set/cancel the
current channel as TAG channel,
“
★
” displayed for channels which are tagged.
·
Set/Cancel All TAG Channels: While Power OFF, hold [LOCK] key and press [ ] key to
power ON, all TAG channels will be canceled in the selected channel group. Repeat the
above operations to set all channels as TAG channels.
◆
Scan Operation
Set scan resume timer in the menu mode.
1. Enter
“ ” menu item to select Scan, exit menu mode to start Normal Scan or Priority
Scan.
·
“SCAN” flashes on LCD.
·
“16” appears on the sub channel readout during priority scan.
·
The scan pauses when a signal is received (The resume time can be set in the set mode).
·
Channel 16 is monitored in priority scan.
·
Press [
▲] or [▼] to change the scan direction.
2. Press [MENU] key again, or press [PTT]/ [C/16]/ [ ] to stop scanning.
◆
Watch Operation
This radio contains Dual/Tri Watch, can be selected in the menu mode.
Dual watch: Watch and monitor in turns between the current channel and Channel 16.
Tri watch: Watch and monitor in turns among the current channel, Channel 16 and CALL
Channel.
1. Enter
“ ” menu item to select Watch, exit menu mode to start Dual Watch or Tri Watch.
·
“DUAL” flashes during Dual Watch; “TRI” flashes during Tri watch.
·
A “BEEP” sound emits when signal is received on Channel 16.
·
Tri Watch switches to Dual Watch when signal received on CALL Channel.
2. Press [MENU] key, or press [PTT]/ [C/16]/ [ ] to stop watch and motoring.
◆
Vibration Water Draining Function
The Vibration Water Draining Function helps to drain the water away from the loudspeaker
housing, which can prevent water ingress to affect the loudspeaker voice quality.
·
When standby, press [MENU] key, then press [ ] key to activate this function.
·
A deep sound emits for 10 seconds to drain water. Any key operation is invalid when vibration
water draining.