Plasmon LD 8100, User Manual, Page: 47 / 105

97662915 B
Page 47
QUICK RELEASE RACK MOUNT DE-INSTALLATION
To de-install the LD 8100 Rack Mount configuration:
1) Remove the Bezel Assembly by grasping both sides of the Bezel Assembly and pulling it up,
away from the chassis.
WARNING
Two people are required to remove the LD 8100 from the rack. Any
attempt to lift the LD 8100 without assistance can result in personal
injury.
2) Lift both Slide Release Latches up and then pull the drive away from the rack to the fully
extended position.
3) Verify that the rack is stable.
4) Press and hold both Inner Slide Channel Release Buttons while pulling the drive out of the
Intermediate Slide Channels. One person can press the Inner Slide Channel Release
Buttons and the second person can slide the drive from the Intermediate Slide Channels
on to a supporting work surface.
Remove the Inner Slide Channels from the LD 8100's chassis by unfastening the six M4 X 6 screws.