Plantronics CT14, User Manual, Page: 10 / 37

14 15
en
Settings
Re-registering the Dial Pad
After the dial pad is de-registered, you must re-register the dial pad before you
can use it.
1
Place the dial pad in the base cradle for several seconds.
2
When the dial pad has registered to the base, the LCD will display
Registration complete , then show the dial pad ID number.
If the display shows Registration failed , try the process again.
Calling Features
Muting the Ringer (Temporarily)
The dial pad must be off the base to mute the ringer.
1
While the phone is ringing, press or to mute the ringer
for this call.
2
The phone will ring again on the next call.
Placing a Call on Hold
1
During a call, press to place the caller on hold.
The display screen will read Line On Hold .
2
To return to the party on hold, press .
The phone will return to the holding party.
NOTE Once five minutes has passed, the on hold party’s line will be disconnected.
Redialing a Number
You can quickly redial the last five numbers dialed on each dial pad.
1
With the phone in standby, press the to open the redial list.
2
Use
and or
to scroll through the redial list.
3
When you find the number you want to dial, press .
NOTE You can also press before you open the
redial list. Find the phone number you want to dial, and then press .
Calling Features
Deleting a Redial Record
1
With the phone in standby, press .
2
Use
and to scroll through the redial list.
3
When you find the redial number you want to delete, press and
select Delete Entry .
4
When the phone asks you to confirm, select Yes .
Adjusting the Audio Tone
If you aren’t satisfied with the audio quality of your phone, you can adjust the
Audio Tone of the headset while on a call. Your phone gives you three audio tone
options:
Low , Natural and High ; the default setting is Natural Tone .
1
To adjust the audio tone while on a call, press .
2
Move the cursor to select Audio Tone , and then press .
3
Move the cursor to select desired option and then press
to confirm.
Locating the Dial Pad
1
To locate a misplaced dial pad, press PAGE on the base when the
phone is in standby.
2
The dial pad(s) connected to the paging base will beep for one minute,
and
Paging appears on the dial pad display.
3
To cancel paging, press PAGE again or any key on the found dial pad.
Low Battery Alert
When Low Battery - Charge Handset appears
in the dial pad display and the phone is in standby,
none of the keys will operate.
If you are on a call, complete your conversation as quickly as possible, and return
the dial pad to the cradle. The battery pack needs to be charged when the empty
battery icon appears.