Planmeca Proline XC Pan, Calibration Manual

Page: 29 / 42

- 29 -
Press Auto Return This will turn the cassette holder to auto return to entry position
after each exposure shot. (Figure 39)
Figure 39
Take an exposure.
2 Setting up the Computer
Click on Start, All Programs, Planmeca, Dimaxis Pro 4.x.x.
2.1 Dimaxis 4.x.x
Click
OK then click OK again. Select New from the bottom of the Select
Image screen
Press
Ready on the touch screen and take an exposure.
Click OK on the computer screen to evaluate the image for alignment.
NOTE: Right click to end a measurement and give the value.
2.1.a Calibrating and measuring image
Click the measurement toolbar at the top. (Figure 40)
Figure 40