Planmeca Compact i5, User Manual

Page: 111 / 326

Press > to display the relevant information.
19.5.4 GUI diagnostics
GUI Diagnostics shows the current hardware revision of the control panel
and also contains tools for finding possible errors in the touch display.
CAUTION
GUI diagnostics is only meant to be used by a qualified Planmeca service
technician.
19.5.5 PlanID
In the
Details tab you can view details on the tag ID and the PlanID reader's
region of operation. To change the region, contact your Planmeca dealer.
CAUTION
The
Configuration tab contains tools for enabling/disabling the PlanID reader
as well as for adjusting its power level, and is only meant to be used by a
qualified Planmeca service technician.
19.5.6 Clock calibration
For instructions on how to calibrate the clock, see section "Calibrating clock"
on page 207.
19.5.7 Product registration
For instructions on how to register your dental unit, see section "Registering
your product" on page 5.
19.5.8 Peripherals
Peripherals contains information on and service tools for:
•
Suction tube cleaning system and LED bar (uWmc circuit board)
• Solanna operating light
• Capacitive patient sensor (Capsense)
• Planmeca ActiveAqua water treatment system
CAUTION
The tools for the suction tube cleaning system and LED bar, Solanna
operating light, and capacitive patient sensor are only meant to be used by a
qualified Planmeca service technician.
CAUTION
The Planmeca ActiveAqua annual maintenance counter is only to be reset
by a qualified Planmeca service technician.
For instructions on how to reset the Planmeca ActiveAqua prefilter change
period and adjust the Planmeca ActiveAqua settings in the ActiveAqua
window, see section "Adjusting Planmeca ActiveAqua settings" on page 258.
19.5.9 Dental unit model
Dental unit model shows the model of your dental unit.
19 Checking dental unit details
User's manual Planmeca Compact i 101