Copyright Planika Sp. z o.o.
www.planikafires.com
6
READY
3.2. The green indicator will blink
to indicate start-up of the device, it takes a few moments for the
appliance to ignite the flame.
3.3. While the appliance is in work mode, the green indicator goes off and the flame starts to appear. The
device works automatically until they run out of fuel or disable the device by the user.
C.
Flame size regulation
The Zen High can operate in two modes: Normal and ECO. The device always starts with a standard flame size. The
device has the adjustable flame size during operation.
In order to reduce the height of the flame, press the ECO button. You will hear two beeps and the ECO button will be
highlighted. The unit is now operating in ECO mode.
To return to the normal height of the flame, press the ECO button, you will hear one beep and the ECO button
backlight turns off. The device is now in normal mode.
ATTENTION!
It might take a few moments for the flame to adjust.
ATTENTION!
The device switches to ECO mode by itself when there is a danger of over-temperature of the device.
D.
Device extinguishing
Press the
START/STOP
button on the control panel. You will hear two beeps and the red indicator will start to blink
The flashing red indicator means that the device is too hot to be restarted. When the device cools the message will
disappear, and depending on the amount of the fuel in the tank, either the green indicator will flash and indicate the
readiness for operation or the blue indicator will indicate the lack of the fuel.
E.
Subsequent start up
If the blue indicator is flashing on the control panel, start from the point B.2.
If the green READY indicator is flashing on the control panel, you can:
•
start form the point B.3.
•
open the fuel filler bolt - the green READY indicator will go off. If:
- the blue indicator blinks and a beep sounds intermittently - the tank is full and it is not allowed to pour any
more fuel! Close the fuel filler bolt and proceed in accordance with section B.3.
- the blue indicators flashes - you can refuel (see section B.2) and turn on the device (see section B.3) or close
the fuel filler bolt and activate the device by following the point B.3.
F.
Information and warning alert
In order to increase safety, the Zen High is equipped with an electronic system to keep the operation safe. In the case
of a dangerous situation, the device immediately triggers alarms.
CAPTION
CAPTION
CAPTION
CAPTION
:
HOT
HOT
HOT
HOT
The indicator is off
The indicator flashes
The indicator is blinking
