background image

Copyright Planika Sp. z o.o.  

www.planikafires.com 

 

 

 

 

 

 

I.

 

General information 

The ZEN HIGH is a decorative appliance with real flames. Due to the innovative technology applied, the ZEN is simple 

and safe to use. 

 

II.

 

Fuel 

In order for the Zen High to function correctly use the recommended FANOLA® liquid or other available on the market 
and  fulfilling  the  criteria  of  being  a  86-96%  denatured  ethanol  in  accordance  with  the  European  Union  guidelines 
(Directive No. 162/2013). 
Using  other  liquids  is  prohibited  as  it  may  lead  to  incorrect  functioning  of  the  device,  damage  of  the  device  and/or 
may cause fire or and/or health risk. The manufacturer takes no responsibility for damage caused by using prohibited 
liquids such as absolute ethanol. 

 

III.

 

Safety 

 

The 

Zen High

 produces a real open fire, so, in order to use the device properly and safely and in order to keep the 

warranty, the following safety rules should be observed. 

 
 
 

 

Do not expose the device to weather conditions. The product is for internal use only. 

 

Please read the device installation manual to avoid placing the device in rooms with a capacity of less than 

required. 

 

While working, the device emits heat, water vapour and carbon dioxide, therefore it is necessary to provide 

proper ventilation of the interior, so that the total air exchange is 1/h. 

 

During  the  device’s  starting  sequence  the  characteristic  smell  of  the  liquid  used  in  the  device  or  the 

recommended FANOLA® liquid. 

 

Do not install the device in areas of large drafts of air, near fans, vents, etc. 

 

Do not place in areas where  there  might be a potentially  explosive atmosphere of paint vapours, industrial 

dusts, etc.

 

 

Do  not  use  the  device  at  the  ambient  temperature  below  10°C  (50°  Fahrenheit)  or  higher  than  30°C  (86° 

Fahrenheit). 

 

Install  the  device  only  on  a  flat,  horizontal  surface.  Setting  on  an  inclined  surface  can  cause  incorrect 

operation, permanent damage to the device or cause fire. 

 

No flammable items should be placed in direct contact and within a radius of 1 m / 3.28 ft around the device. 

Do not place near curtains, net curtains, etc. 

 

It is obligatory to have a carbon-dioxide or dry chemical extinguisher placed nearby the device. 

 

The enabled device must not be moved. Wait for complete fuel burn-out, disconnect the power supply and 

cool down the elements before moving the device. 

 

The device should not be left without adult supervision. 

 

Prevent handling of the device by persons not trained. 

 

Do  not  attempt  to  make  changes  or  repairs  to  the  construction  of  the  device  on  your  own.  Repairs  can  be 

made only by a person trained to service the device. 

 

Do  not  pour  FANOLA  liquid  to  a  furnace,  as  it  may  cause  damage  of  the  device  and  cause  fire.  Pouring 

FANOLA liquid to a burning furnace may cause a sudden ignition and can cause fire, burns and a risk to life. 

 

Do not heat the FANOLA liquid before starting-up the device. 

 

Do not start up the device if the FANOLA liquid spilled out from the container. 

 

Do not cover the working device as it may cause fire. 

 

Keep the device and fuel away from children, pets and unauthorized persons. 

 

FANOLA liquid is not suitable for consumption. Avoid contact with skin and eyes. 

 

Do not operate by the filler when the device is running. 

 

Do not tamper with the elements inside the furnace body at the risk of burns, damage to the device or fire. 

 

Some  elements  of  the  device  heat  up  to  high  temperatures.  Do  not  touch  the  area  of  the  furnace  of  the 

device as it may cause burns. 

WARNING

!

Summary of Contents for zen high









Reviews: