18
TROUBLESHOOTING
Some alarms are accompanied by a sound signal. Press
START/STOP
to mute.
Lp.
DIODES
SOLUTION
(contact the Service Department if the solution does not eliminate the error)
1.
The device is being cooled. Wait for the green diode
.
2.
The device run out of fuel while operating. The device is being cooled.
Wait for the red diode to turn off. Refill the tank.
3.
Fuel has spilled in the device. Please contact service departament.
4.
Device error. Press and hold
ECO
for 10 seconds.
5.
Device error. Press the ECO button for 10 seconds.
6.
Room temperature too low (<10
°C)
or device error. Increase the room temperature.
Press and hold ECO for 10 seconds. Wait for the green diode
.
FUEL
Use only fuels consisting of
86-96,6%
ethanol by volume. FANOLA® is the recommended fuel. Do not use gel, thick
and viscous fuels or fuels of improper electric conductivity.
The values must be compliant with those of FANOLA®.
Other fuels, such as dehydrated ethanol (i.e. consisting of more than 96,6% by volume ethanol) will cause a device error
and loss of the guarantee.
Fuels consisting of 100% by volume ethanol will damage the device.
CLEANING
–
Clean with a damp cloth and delicate detergents, only when the device is turned off and cooled.
SERVICE
-
(keep the provided USB cable for servicing purposes)
We are available on livechat at
EN
GL
ISH
Summary of Contents for Pure Flame
