Copyright Planika Sp. z o.o.
www.planikafires.com
i1262#03
05.06.2017
2
•
Do not install the device in areas with a capacity of less than 64 m
3
/ 2260 ft
3
(25 m
2
/ 265 ft
2
with a height of 2.6 m / 8.53 ft).
•
While installing the device according to the instruction manual local and national
guidelines are to be observed.
•
Place the device on a levelled surface. The place for the device has to be designed with the
use of a spirit level.
•
Do not obstruct the ventilation slots and/or ventilators.
•
Do not place on the furnace any decorative elements which are not provided by the
manufacturer.
•
Do not install the device in areas of large drafts of air, near fans, vents, etc.
•
Do not place in areas where there might be a potentially explosive atmosphere of paint
vapours, industrial dusts, etc.
•
No flammable items should be placed in direct contact and within a 1 m / 3.28 ft from the
device. Do not place near curtains, net curtains, etc.
•
Do not expose the device to meteorological conditions. The device is for indoor use only.
•
Do not place the device in close proximity to sources of humidity.
•
It is obligatory to have a carbon-dioxide (CO
2
) or dry chemical extinguisher placed nearby
the device.
•
The room in which the device will be installed must have efficient ventilation to ensure air
exchange in the room at least once per hour.
•
Do not start the device before a complete and proper installation.
•
Do not fill the fuel container before placing the product into its final position.
•
In case of mounting more than one unit in the room, the minimal cubature is the sum of
cubatures required for each unit.
•
The substrate on which the device is installed must have a load capacity of 130 kg /
286,6 lbs.
•
The device must be place out of reach of: children, animals and unauthorized persons..
•
Do not install the device in mobile facilities (e.g. trailers, yachts).
!
