Copyright Planika Sp. z o.o.
www.planikafires.com
8
F.
FAST START function
With the FAST START function turned on, the waiting time for flame is shortened during the device start up. START UP function is
factory-set.
START UP function is possible to be turned on or turned off only when the green led is lit on the control panel
.
To disable FAST START, hold down ECO button for about 10 s, until you hear 4 beeps.
To re-enable the FAST START function hold down ECO button for about 10s, until you hear 2 beeps.
WARNING! With FAST START function enabled, the device consumes 100 W of energy.
G.
Information and warning alert
In order to increase safety, the
Lincoln
is equipped with an electronic system to keep the operation safe. In the case of a dangerous
situation, the device immediately triggers alarms.
LEGEND:
Information and warning alerts
Lp.
Control Panel
Indicators
SOUND
SIGNALS
Event
Procedure
co
n
st
a
n
t
in
te
rm
it
te
n
t
1
If the fire is not visible
- NO POWER.
Make sure the device is properly connected to the power
supply.
If you see a fire
- the device is in operation.
Do not leave the device unattended by an adult.
2
The device is ready for
operation.
You can run the device in accordance with section B.4
3
No fuel in the tank
Fill up the fuel starting from the point B.2.
4
Initial start-up of the device
Wait for the appearance of fire, the light goes off.
5
Works protected against too
rapid restart of the hot device
or the allowable temperature
has been exceeded
Allow the device to cool down. After cooling the device,
the red indicator will turn off and the green indicator will
start to flash.
6
The device automatically
turns off due to lack of fuel in
the tank.
Allow the device to cool down. After cooling the device,
the red indicator will turn off and the blue indicator will
start to flash.
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
HOT
HOT
HOT
The indicator is off
The indicator flashes
The indicator is blinking
