Copyright Planika Sp. z o.o.
www.planikafires.com
9
7
The device is ready for
refuelling.
Fill the fuel in accordance with B.3 paragraph.
("I" on the green button is on)
8
×
The fuel tank is full (with
intermediate sound).
The tank is full and you should not pour more fuel! You
must put the automatic pump to the Cabinet on the right
side of the body in accordance with point B. 3. 4. Then
press "O" on the green button. Blue LED turns off and the
green LED turns on.
9
×
There was a fuel spill or
If refueling process is in progress it will cease
automatically. Press the START / STOP button on the
control panel or on the remote control to turn off the
sound. Please make sure, that the fuel hose is connected
properly. Remove visible moisture.
If the spillage is
excessive the source of power needs to be disconnected
Wait at least 1 hour to evaporate the remaining
moisture. Hold the ECO button for about 10 seconds. If
the alarm message reappears, wait a little bit. If the
message reappears, contact your service provider.
The time given for the flame
to appear has been exceeded
If the alarm message appears during the start of the
device, press the START / STOP button to turn off the
sound and hold the ECO button for about 10 seconds.
If the message reappears, contact your service provider.
10
×
Operation error
Press the START / STOP button to turn off the sound and
hold the ECO button for about 10 seconds.
If the message reappears, contact your service provider.
11
×
The device temperature
below 10°C or critical
operation error
Press the START / STOP button to turn off the sound.
Provide higher ambient temperature. Wait until the
device obtains the indoor temperature. Hold down the
ECO button for about 10 seconds.
If the message reappears, contact your service provider.
12
×
Too much liquid in the tank
Press the START / STOP button to turn off the sound and
hold the ECO button for about 10 seconds. If the
message reappears, contact your service provider.
13
×
Green refilling button failure
or green refilling button
switched to „I” beside
refuelling procedure
Press the START / STOP button to turn off the sound and
hold the ECO button for about 10 seconds.
If the message reappears, contact your service provider.
14
×
Main fuel pump work issue
Press the START / STOP button to turn off the sound and
hold the ECO button for about 10 seconds.
If the message reappears, contact your service provider.
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
READY
FUEL
HOT
