Copyright Planika Sp. z o.o.
www.planikafires.com
3
I.
General information
FLA 2 model E
is not a heating device, but modern decorative device that uses the beauty of a real flame. Due to the
innovative technology operation of
FLA 2 model E
is simple and safe.
II.
Fuel
In order for the
FLA 2 model E
to function correctly use the recommended FANOLA® liquid or other available on the
market and fulfilling the criteria of being a 86-96% denatured ethanol in accordance with the European Union
guidelines (Directive No. 162/2013)
Using other liquids is prohibited as it may lead to incorrect functioning of the device, damage of the device and/or
may cause fire or and/or health risk. The manufacturer takes no responsibility for damage caused by using prohibited
liquids such as absolute ethanol.
Explanation of symbols placed on the flap of the device:
It is forbidden to pour fuel into a burning device!
It is forbidden to pour fuel into a hot device!
FANOLA ® - additional information:
Warning symbols:
H225: Highly flammable liquid and vapors
H319: May be skin irritant
H336 - The substance can cause sleepiness, dizziness
Warning markings:
R-11 - Highly flammable liquid
Operational notes:
S-2 – Store beyond children's reach
S-7 - Keep container tightly closed
S-16 - Keep away from sources of ignition - No smoking
S-46 – In case of ingestion immediately seek medical advice – show the package or label
This mark stands for information which one needs to acquaint with.
This mark stands for warnings which one needs to acquaint with.
III.
Safety
As
FLA 2 model E
produce a real open fire it is necessary to follow the below specified rules in order to enable
the product to be used in a technically correct and safe manner as well as to maintain the warranty.
•
When installing the device according to the instructions, you must comply with national and local regulations.
•
It is required to read the installation instructions in order not to use the device in an improper manner or in
rooms with smaller cubic capacity than required.
•
Products should not be exposed to atmospheric conditions. It’s the product for internal use only.
•
When turned on, the device produce steam, carbon dioxide and heat, therefore it’s necessary to provide
adequate ventilation so that the total replacement of the air in the room is min. 1 / h.
•
Do not use the device in the temperature lower than 10 °C and higher than 30 °C.
OSTRZEŻENIE
!
OSTRZEŻENIE
!
