5
FW-100TA
6
The proper installation of these Fast Ethernet Adapters can be divided into
three phases:
●
SYSTEM: Putting the Adapter into a computer.
●
CABLE: Connecting the Adapter to the network.
●
SOFTWARE: Installing and configuring the NOS driver.
●
Disconnect the computer
'
s power supply.
●
Open the computer.
●
Remove the protective bracket from any available PCI-Bus
Expansion Slot.
●
Save the screws!
●
Remove the Adapter from the bag.
●
With the Adapter
'
s bracket facing out, insert the Adapter into the
PCI- Bus slot.
●
Press firmly, but do not bend the pins!
●
Secure the Adapter bracket with the screws.
●
Replace the computer
'
s cover.
●
Plug one end of a TP cable into the Adapter
'
s RJ-45 socket.
●
Plug the other end of the cable into any 100BASE-TX or 10BASE-T
Hub port.
See 100BASE-TX an d 10 BASE-T section for det ai ls on cabl e type an d
length.
Chapter 2
Installation
2
1
System Installation
2
2
Network Cable Connection
