manualshive.com logo in svg

Planex Cloud Connect CS-W06N, User Manual

Share
Download
Planex Cloud Connect CS-W06N User Manual Download Page 13

CS-W06N 

 

13

Third, unplug the Ethernet cable 

 

If the WiFi test is successful, you can then enable the WiFi connection by 

unplugging the Ethernet cable from the IP CAM. The IP CAM will detect the Ethernet 

cable unplugged condition and start the WiFi connection. After the WiFi is connected, 

the IP CAM will connect to the Internet immediately.   

Notice :   

1.  Please remember that the WiFi connection will use a different IP address, you will 

need to do the “Auto Search” function in the Touch2See again to find the IP CAM 

again after the WiFi is connected. 

2. 

If you want to switch back to the wired Ethernet connection, just plug in the 

Ethernet cable into the IP CAM again. Do not need to disable the WiFi function on 

the web pages.

 

 

Figure 2-9: Unplug the Ethernet cable to enable the WiFi function 

 

2.5. Push notification 

 

The IP CAM supports push notification when using the iPhone/iPad or Android 

devices. So that when there is alarm from PIR, motion detection or sound 

detection, your mobile device will receive alarm notification. You can 

immediately playback the recorded video(if SD card inserted) or do a live view. 

 

Please download the “Touch2See” app from App Store for iPhone. 

Please download the “Touch2See” app from App Store for iPad. 

Please download the “Touch2See” app from Android Market for Android 

devices 

 

To enable the push notification, go to the settings page of the specific camera, 

choose “alarm notification”, key in the login account( default is “admin”, 

Summary of Contents for Cloud Connect CS-W06N



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands