CS-W06N
10
Figure 2-6: The ID/Password card
Notice 1:
1. You can modify this play-video password by entering into the web configuration
pages. Please refer to section 3.6 for more information.
2.
You can also add the IP CAM into the CameraList in the Touch2See software to
have more convenient video display, please refer to the user manual of the
Touch2See software for more functions.
Seeing the video in a remote location
After the IP CAM is installed and you can see the video from the Touch2See
software in the local network, it’s very easy to see the video in a remote location. All
you need to do is add a camera item in the “CameraList” folder of the Touch2See
software, key in the IP CAM ID and Password(from the ID/Password card). And then
double click this camera item. You will then see the Camera video immediately. No
further NAT/router setting modifications are needed.
