17
- If yes, go to step 7.
- If no, go to next step.
5. Click the
“Release”
button, then click “
Renew
” button.
6. The “IP Address”, “Subnet Mask” and “IP Gateway” should been got
to “192.168.1.x”,”255.255.255.0” and “192.168.1.1”.
7. Click
“OK”
.
For Windows 2000/XP
1. Click the
“Start”
button. Choose
“Programs\Accessories\”
, then
click
“Command Prompt”
.
2. In “Command Prompt” window, type the
“ipconfig”
and click
Enter
.
3. Check whether the “192.168.1.x”,”255.255.255.0” and “192.168.1.1”
has already been got onto “IP Address”, “Subnet Mask” and “Default
Gateway”. (IP Address is within the range of 192.168.1.2 ~
192.168.1.254.)
- If yes, go to step 7.
- If no, go to next step.
4. Type the
“ipconfig /release”
and click
Enter
. The IP address will
release.
5. Type the
“ipconfig /renew”
and click
Enter
. The IP address will
renew.
6. The “IP Address”, “Subnet Mask” and “Default Gateway” should been
got to “192.168.1.x”,”255.255.255.0” and “192.168.1.1”.
7. Type the
“exit”
and click
Enter
, will close this window.
There may be something wrong in your installation procedure. Check the
following items in sequence:
1. Is the Ethernet cable correctly connected between the BRL-04FM and
the computer?
The LAN LED on the BRL-04FM and the Link LED of the network
card on your computer must be on.
2. Is TCP/IP properly configured on your computer?
If the IP address of the BRL-04FM is 192.168.1.1, the IP address of
your PC must be from 192.168.1.2 - 192.168.1.254 and the default
gateway must be 192.168.1.1.
Summary of Contents for BRL-04FM
Page 1: ......
