- 10 -
Configuration via Web
Before you start setting up this IP Sharing via browser-based web configuration, make sure:
Assuming the workstation’s TCP/IP is set to obtain IP automatically and the IP Sharing
Device’s Local Port is set to “Distribute IP” (default), and all the cables are connected
correctly, you are now ready to configure this device via Web Browser. Open the browser,
enter the local port IP address (default at 192.168.1.1) of the IP Sharing Device, and click
“Go” to get the login page.
Figure 3
No user name is required. The default password is
“0000”
. If you have set a password, enter
that and click
OK
to continue.
Figure 4
At the setup home page, the left navigation pane where bookmarks are provided links you
directly to the desired setup page. You can select Internet Port, Local Port, Management,
Virtual Server, Packet Filter, Static Router, Dynamic DNS, Network Status (WAN IP Status,
Session List, and User’s List), Factory Reset, Save Configuration, and Firmware Upgrade.
Click on the desired setup item to expand the page in the main navigation pane. The setup
pages covered in this utility are described below.
Summary of Contents for BRL-04AX
