manualshive.com logo in svg

Planex BRL-04AX, User Manual

Share
Download
Planex BRL-04AX User Manual Download Page 35

- 35 - 

Save Configuration 

This function enables users to always save the current configurations as a file (i.e. config.sav), 
so that no re-entry is required when users want to switch between various configurations. To 
load configuration from file, enter the file name or click Browse… to find the file from your 
computer.  

 

Figure 17 

 

 

Figure 18 

                      Figure 19 

 

SAVE 

Click SAVE to save the current configuration to file. 

UNDO 

Click to clear the input. 

LOAD 

Click to start loading configuration from file when you are done with the
previous settings. 

 

When prompted the upper left screen, select “Save this file to disk”, and the upper right 
screen will prompt you a dialog box to enter the file name and the file location. Please note 
that the configuration file is in .sav format. 

Load Configuration from File 

File Path/Name   Browse…: If you want to load a configuration file, enter the file name with 
the correct path and then click on LOAD. Or click Browse… to select the file. 

Summary of Contents for BRL-04AX



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands