To access the Internet through the BRL-04AR Broadband Router, you must
configure the network settings of the computers on your LAN to use the
same IP subnet as the BRL-04AR. The default network settings for the
BRL-04AR are:
IP Address: 192.168.1.1
Subnet Mask: 255.255.255.0
All PCs connected to the BRL-04AR must be in the same IP subnet as the
BRL-04AR. The default IP address of the BRL-04AR is 192.168.1.1 (where
x means 2-254) and the subnet mask is 255.255.255.0. You can set the IP
address for client PCs either by automatically obtaining an IP address from
the BRL-04AR's DHCP service or by manual configuration.
CONFIGURING CLIENT TCP/IP
Network Interface Card(NIC) setting
Please install your NIC first, then follow the step as below.
(1) Click "Start"
"Setting"
"Control Panel"
14
Chapter 3
TCP/IP Configuration
Summary of Contents for BRL-04AR
