INSTRUCTIONS MANUAL
Please visit http://www.planetswater.com
for the latest version of this manual
© 2010
9
5.
Press C/F button to switch the temperature display between Celsius and
Fahrenheit.
6.
Generally, both heating and cooling can be turned on together. When the machine
is in heating and cooling process, Hot and cold water temperature will remain in the
preset range automatically.
Hold the C/F button to have the hot water temperature-display indicating the current
setting. Then press HOT or COOL button to adjust the setting.
Press HOT to increase the setting value; press COOL to lower the value.
Hot water adjustment range is between 75
℃
~93
℃
.
To adjust cool water temperature setting, hold C/F again to have the Cool water
temperature display indicating the current setting. Then press HOT or COOL button
to adjust the setting.
Press HOT to higher the setting value, press COOL to lower the value.
Cool water adjustment range is between 4
℃
~10
℃
.
7.
Time for the filtration system replacement.
REPLACE on display will blink to remind user to clean or change filters.
(Please refer to Filter Replacement for details)
After the cleaning or replacement is done, keep pressing RESET till the REPLACE
indication stops blinking. Press RESET again to turn off REPLACE indication and to
reset the replacement warning time.
8.
The system will enter defrosting status and DEFROST indication on screen will
blink when the environmental temperature is too low.
If it is required to check the current defrosting temperature, keep pressing COOL to
show defrost temperature at the position of humidity level on screen.
9.
Press
button to dispense cool water. To dispense hot water, keep pressing
LOCK button till the HOT indication blinks and it gives beeping sound, then press
button to dispense hot water.
10.
Don’t be alarmed when your machine turns off automatically. To conserve energy,
your machine has been fitted with an electronic sensor, which automatically
switches the machine off when the storage tank is full.
