Planet WSG-500 User Manual Download

Page: 99 / 162

User’s Manual

WSG-500 Wireless Hotspot Gateway

ENGLISH

The description of the above-mentioned table is as follows:

Item

Description

Firmware Version

The present firmware version of WSG-500

System Name

The system name. The default is WSG-500

Portal URL

The page the users are directed to after initial login success.

SYSLOG server- System Log

The IP address and port number of the external SYSLOG Server.

N/A

means that it is not configured.

SYSLOG server- On-demand

Users Log

The IP address and port number of the external SYSLOG Server.

N/A

means that it is not configured.

Warning of Internet

Disconnection

Show the status for the connection at WAN is normal or abnormal

(

Internet Connection Detection

) and all online users are

allowed/disallowed to log in the network.

Retained

Days

The maximum number of days for the system to retain the users’

information.

User Log

Receiver

Email

Address (es)

The email address to which the user log information will be set.

NTP Server

The network time server that the system is set to align.

System Time

Time

The system time is shown as the local time.

Idle Time Out

The minutes allowed for the users to be inactive before their account

expires automatically.

User Session

Control

Multiple

Login

Enabled/disabled stands for the current setting to allow/disallow

multiple login from the same local account.

Preferred

DNS Server

IP address of the preferred DNS Server.

DNS

Alternate

DNS Server

IP address of the alternate DNS Server.

Summary of Contents for WSG-500



































































































































































Search results

Summary of Contents for WSG-500

Reviews:

Related manuals for WSG-500

Brands by name

Popular brands

Planet WSG-500, User Manual

Search results

Summary of Contents for WSG-500

Reviews:

Related manuals for WSG-500

Brands by name

Popular brands