background image

 

5.6.4 Special 

Applications 

Some applications require multiple connections, such as Internet games, video conferencing, Internet 

telephony and others. In this section you can configure the router to support multiple connections for 

these types of applications. 

 

 

Parameters 

Description 

Enable 

Enable the Special Application function. 

IP Address   

Type IP Address for the Popular Application. The computer with this IP 

address acts as a host IP with unlimited Internet access.     

TCP Port to Open   

UDP Port to Open   

Enter the In-coming (Inbound) port for this type of application (e.g. 

2300-2400, 47624). 

Note:

 Individual port numbers are separated by a comma (e.g. 47624, 5775, 

and 6541 etc.).     

Comment 

The description of this setting. 

Popular Applications 

This section lists the more popular applications that require multiple 

connections. Select an application from the Popular Applications selection. 

Once you have selected an application, click the “Add” button in right side of 

this setting. This will automatically copy the Port Trigger information required 

for this popular application into the input fields. 

Add 

Add the settings into the “Current Trigger Port Table”.   

Reset 

Click “Reset” will clear your current settings to allow you to enter again. 

 

60

Summary of Contents for WRT-625G

















































































Reviews: