Planet WNRT-633 User Manual Download Page 92

Page: 92 / 114

User’s Manual of WNRT-633

-85-

5.11.2 Statistics

Choose menu “

Status



Statistics

” to show the packet counters for transmission and reception

regarding wireless and Ethernet network.

Figure 5-11-2

Statistics

The page includes the following fields:

Item

Description

Wireless LAN

Sent Packets

It shows the statistic count of sent packets on the wireless LAN interface.

Wireless LAN

Received Packets

It shows the statistic count of received packets on the wireless LAN interface.

Ethernet WAN

Sent Packets

It shows the statistic count of sent packets on the Ethernet WAN interface.

Ethernet WAN

Received Packets

It shows the statistic count of received packets on the Ethernet WAN
interface.

Refresh

Click the refresh the statistic counters on the screen.

5.11.3 Log

Choose menu “

Management



Log

” to configure the settings of system log. You can check the box of

the items you want to record it in the log. After the configuration, please click the “Apply” button to save

the settings.

Summary of Contents for WNRT-633



















































































































Search results

Summary of Contents for WNRT-633

Reviews:

Related manuals for WNRT-633

Brands by name

Popular brands

Planet WNRT-633, User Manual

Search results

Summary of Contents for WNRT-633

Reviews:

Related manuals for WNRT-633

Brands by name

Popular brands