User’s Manual of WNRT-633
-26-
The page includes the following fields:
Object
Description
IP Address
Enter the IP address of your Router.
Factory default:
192.168.1.1
Subnet Mask
An address code that determines the size of the network.
Normally use
255.255.255.0
as the subnet mask.
Step 4 WAN Interface Setting
The Wireless Router supports five access modes in the WAN side. Please choose the correct mode
according to your ISP Service.
Mode 1 - DHCP Client
Figure 5-1-5
Setup Wizard – WAN Interface Setup screenshot
Select DHCP Client to obtain IP Address information automatically from your ISP.
Mode 2 Static IP
Select
Static IP Address
if all the Internet port’s IP information is provided to you by your ISP. You will
need to enter the
IP address
,
subnet mask
,
gateway address
, and
DNS address
provided to you by
your ISP. Each IP address entered in the fields must be in the appropriate IP form, which are four
octets separated by a dot (x.x.x.x). The Router will not accept the IP address if it is not in this format.
