User’s Manual of WNRT-633
-58-
Default is “
Enabled
”.
Data Rate
Set the wireless data transfer rate to a certain value. Since most of
wireless devices will negotiate with each other and pick a proper data
transfer rate automatically,
it’s not necessary to change this value
unless you know what will happen after modification.
Default is “
Auto”
.
Associated Clients
Click the “
Show Active Clients
” button to show the status table of
active wireless clients.
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater Mode, check the box and enter the
SSID you want to broadcast in the field below. Then please click
“Security” submenu for the related settings of the AP you want to
connect with.
5.5.2 Advanced
Choose menu “
Wireless Setup
Advanced Settings
”, and you can configure the advanced settings
for the wireless network on this page. After the configuration, please click the “Apply” button to save
the settings.
Figure 5-5-6
Wireless Advanced Settings