setting.
’EAP Fast’ authentication type also have a sub-menu to set EAP fast-specific
parameters:
If you need to use protected authentication credential, check ‘Use protected
authentication credential’ box, and click ‘Import’ to load .pac credential file; to
remove a loaded credential file, click ‘Remove’.
Session
ere. If you don’t know if you
Resumption
You can enable or disable session resumption h
should enable session resumption or not, please ask your 802.1x
authentication administrator.
ID \ Password
nd password and other information if it is
tab
Input 802.1x username (ID) a
required here. Click ‘Show Password’ to show the password you typed.
Client
ation tab
Use this tab to select a local certificate from dropdown menu. If the access
Certific
point you wish to connect required a specific client certificate, the certificate
must be installed on your computer, and you can select the certificate here.
Server
tion tab
Use this tab to use server-based certification. Please select a CA (Certificate
CA
ith
Certifica
Authority) from dropdown menu. If intermediate certificates are allowed,
please select ‘Allow intermediate certificates’. Also, if you need to specify
server’s name, you can specify it in ‘Server name’ field. You can select
‘Server name must match’, so the CA server’s name must be the same w
the value you set in ‘Server name’ field; If only the domain name part of full