13
u
Authentication Mode:
This parameter must be consistence with the associated wireless
station.
Open System
–
No authentication is needed among the wireless stations.
Shared Key
–
Only wireless stations using a shared key (WEP Key identified) are
allowed to connecting each other. Setup the same key as the wireless stations which
WL-U351 intends to connect.
Auto
–
Auto switch the authentication algorithm depending on the wireless stations
which WL-U351 is connecting to
u
Key Length:
Select the 64-bit or 128-bit to encrypt transmitted data. Larger key length
will provide higher level of security, but the throughput will be lower.
u
Default Key ID:
Select one of the keys (1~4) as the encryption key.
u
Key Value
: The keys are used to encrypt data transmitted in the wireless network. Fill the
text box by following the rules below:
64-bit
–
Input 10 digit Hex values (in the
“
A-F
”
,
“
a-f
”
and
“
0-9
”
range) as the encryption
keys. For example:
“
0123456aef
“
.
128-bit
–
Input 26 digit Hex values (in the
“
A-F
”
,
“
a-f
”
and
“
0-9
”
range) as the encryption
keys. For example:
“
01234567890123456789abcdef
“
3.4 Advanced Setting
This screen allows user to enable/disable power saving mode, setup the fragmentation threshold
and RTS/CTS threshold of WL-U351.
u
Power Saving Mode:
Check the check box to enable power saving mode. You
may control the power consumption of WL-U351 by adjusting the save power
level from 1 to 4. The higher power save level selected, the lower power used.
But lower power is supplied may slow down the transmission rate of WL-U351.
