26
2.
Act as Slave test station:
You can press [
Start
] button to start the slave test station. The ”Slave Test Station” window
will be displayed after pressing [
Start
] button.
The “Slave Test Station” window contains following status/statistical information during the Link
Quality Test session:
Fig 4.10 Act as Slave test station
¨
My Address:
The slave test station’s physical address.
¨
Packet Received:
Total test packets received.
¨
Elapsed Time:
Total testing time.
¨
Signal Level:
The signal level when receiving last test packet. The signal level is
calculated as the percentage of its signal level measurement relative to the full signal level.