13
3-3 Setup WireFree for NetWare Client –Using ODI Driver
(DOS / Windows 3.x)
For DOS and Windows 3.x NetWare Clients, WireFree provides the ODI driver. The
ODI driver program allows you to run Novell NetWare’s IPX protocol stack in your
workstation. The WireFree ODI driver supports the Port, Node Address, Protocol and
Frame options for creating your own
NET.CFG
file. For more information on these
keywords, please refer to Novell’s “NetWare ODI shell for DOS – NET.CFG options.”
Install a
NetWare 3.x/4.x ODI DOS and Windows 3.x Workstation (using NetWare Client
Install)
1.
Install the NetWare ODI Client Driver files into your workstation, if not yet installed.
Follow the installation procedure described in the NetWare installation manual.
2.
The suggested way to install a NetWare Client (workstation) is to use the
NetWare Client
Install
program to install all necessary files. Please follow its prompted screens to
accomplish the installation procedure and select the WireFree ODI driver as the network
driver.
3.
To select the ODI driver of the WireFree wireless LAN adapter, copy the files to nwclient
directory.
WPCMCIA.COM
WPCMCIA.INS
4.
The NetWare Client Install program copies the necessary files for NetWare Client. Please
continue its installation procedure to completion. Upon completion, a new
NET.CFG
file
will be created in your NWCLIENT directory. Typically, this file contains the following
lines:
