- 1 -
Chapter 1 Introduction
Thank you for purchasing WAP-1965. This device features the latest innovation wireless technology
making the wireless networking world happened. This manual guides you on how to install and properly
use the WAP-1965 in order to take full advantage of its features.
1.1 Package Contents
Make sure that you have the following items:
•
One WAP-1965
•
One AC Power Adapter
•
One User
’
s Manual and Utility CD
•
One Quick Installation Guide
Note:
If any of the above items are missing, contact your supplier as soon as
possible.
1.2 System Requirements
Before installation, please check the following requirements with your equipment.
•
Pentium Based (And Above) IBM-Compatible PC System
•
CD-ROM drive
•
Windows 98/ME/2000/XP Operating System with TCP/IP protocol
1.3 Features
•
Four operation modes selectable: AP / AP Client / Point to Point / Point to Multipoint
•
Utilize Direct Sequence Spread Spectrum (DSSS) technology and support the modulation of
Packet Binary Convolutional Code (PBCC) mode to provide robust, interference-resistant solution
in a multi-user environment
•
Wireless LAN IEEE802.11b compliant
•
Auto Fall-Back Data Rate for Long-Distance Communication and Noisy Environments
•
High-speed data transfer rate up to 22 Mbps
•
4X mode can raise wireless performance to 44Mbps equivalent
•
Features Roaming, Best Access Point Selection, Load Balancing, and Network Traffic Filtering
•
Support 802.1X authentication
•
64bit, 128bit and 256bit WEP (Wired Equivalent Privacy)
•
Support 63 clients to connect the network. (For best performance, the suggested maximum clients
number of one WAP-1965 in AP mode is 25.)
•
Provide Windows-base configuration utility and Web Configuration
•
Support DHCP Server and Client
•
Support MAC Filter
