- 19 -
3.2.2.4 WEP Settings
Data Encryption:
Select this option when you want to enable WEP function.
Auth. Mode:
Open Authentication:
With this setting, any station in the WLAN can receives and transmits
data from the Access Point (null authentication).
Shared Authentication
: With this setting, only stations using shared key encryption identified
by the Access Point are allowed to associate with it.
Auto Switch
: With this setting, stations can communicate with the Access Point either with or
without data encryption.
WEP Key Settings:
You can define the WEP (Wired Equivalent Privacy) function by yourself. There
are 4 keys available, please ensure you have enter correct number for the key values with different
Key Length and coding (Hex or ASCII) as 64bit (10 Hex digit / 5 ASCII), 128bit (26 Hex digit / 13
ASCII) or 256bit (58 Hex digit / 29 ASCII), please select one of them and enter the key you want to
use. When Hex is selected, you may enter alphanumeric characters in the range of
“
A-F
”
,
“
a-f
”
and
“
0-9
”
in the WEP Key entry field. Alternatively, you may enter digit hexadecimal values in the range
of
“
a-z
”
,
“
A-Z
”
and
“
0-9
”
.
Note:
If you have many WAP-1965s in LAN and you want to set them have the same WEP key. You
can set one of them, and then select all the WAP-1965 in the
“
Available AP
”
and press Apply. You
will see a dialog box appears as below. You can enter their User Name and Password in this dialog
box and Click OK to apply.
