WireFree Wireless LAN
8
setting: the first channel)
essid
:
Input a six-digit ESS ID (i.e., 000000~999999) of your Access Point.
(Default setting: default) (Works if the Access Point Mode is
Wireless
LAN Access Point
.)
rts_threshold
:
Assign a RTS/CTS packet size.
p2p_dest:
Set the WAP-1000 Access Point’s Inter-Building connection
mode to
Broadcast
(00:60:B3:FF:FF:FF or FF:FF:FF:FF:FF:FF) or
Unicast
(Fill in the MAC address of destination Access Point).
(Default setting: None 00:60:B3:00:00:00) (Works if the Access Point
Mode is
Inter-Building Connection
.)
ip_bootp:
WAP-1000 Access Point supports bootp protocol. WAP-1000 Access
Point can automatically get an IP address from bootp server.
ip_address
:
Input the IP Address of your Access Point.
ip_netmask
:
Input the Subnet Mask Address of your Access Point.
ip_gateway
:
Input the Default Gateway Address of your Access Point.
iii.
To change settings, please type “set xxx(parameter) xxxx(value) (i.e. set mode ap,
meaning set the Access Point as receiver of WL-2400 / WL-3501)
iv.
If you want to change the settings via network, some parameters such as IP address,
Subnet mask and Gateways must be configured.
