FAX Setting
The T.38 FAX procedure is used for the changeover from VoIP to fax mode during a call. The SIP will
establish a normal VoIP call using INVITEs with SDP field to support T.38 detail.
T.38 Option
：
Select an option from the pull-down menu. Default setting is Voice.
General Dialing Setting
Inter-digit Timeout:
If no other number is being dialed within this interval, the Telephony WATA will
terminate this call. Assign the time interval from 1 to 20, default setting is 4 seconds.
First-digit Timeout:
If you pick up the phone without dialing any number within this period of time, the
tone will be changed to busy tone. Assign the time interval from 1 to 60, default setting is 16 seconds.
Feature Invocation Key:
Key to invocate the other features. The setting is FlashHook key.
Transfer Key:
Keys to be pressed to initiate a call transfer. This is activated when HOLD/FLASH-HOOK
is pressed on a call. The default setting is
*#
.
New Call Key:
Keys to be pressed to initiate a new call. The default setting is
**
.
Three Way Conference Key:
Keys to be pressed to initiate a 3-way conference call. The default setting
is
*3
.
Hold Call Key:
Keys to be pressed will be holding a call. The default setting is
*1
.
Send #
：
Enable/Disable, Default is Enable. Speed dial, after final dial don’t need wait inter-digit time.
Phone Book
URI (Uniform Resource Identifier) Phone Book lets you define a button or a set of buttons to link to a
specific number defined in URI Phone Book.
Speed Dial:
Select the speed dial shortcut to use from #1 to #9.
Phone Number:
Enter the international number to dial.
Note:
Note descriptions for the Phone member.
55
