PLANET VoIP
2. BASIC CONFIGURATION
This chapter shows you the starting point of VIP-100T to be
integrated into your network and/or Internet. Configuration steps
in this quick guide will be focused on keypad configuration. More
detail configuration, including keypad, web, and telnet
instructions will be illustrated in respective chapters in user
’
s
manual.
2.1 Initialize VIP-100T
2.1.1 Start up
(a) Power on, the LCD screen shows as below.
(b) Wait a moment until VIP-100T finishes boot program
initialization.
(c) You can see flashing greeting as below:
(d) Then VIP-100T will come into standby mode: The main
LCD screen would be shown as similar as following. The
P2P word means VIP-100T is now in Peer-to-Peer Mode,
and when VIP-100T is connected to SNTP server, on LCD
will show current time obtained from SNTP server.
VIP-100T
Board Start Booting
System Initializing
………
..
VIP-100T
P2P
10:10:10 AM
Summary of Contents for VIP-100T
Page 1: ......
