background image

2. INSTALLATION 

This section describes the functionalities of the Fast Ethernet Switch’s 

components and guides how to install it on the desktop. Basic 

knowledge of networking is assumed. Please read this chapter 

completely before continuing. 

2.1 Product Description 

With concepts of "Easy to Install and use", "Compact-sized design", 

and "Simple troubleshooting", PLANET SW-502/SW-802 provides 

cost-conscious business and home users with the foundation of an 

integrated system of small-office / home-office networking. The SW 

502/SW-802 is the fancy-shape plastic models and just right for your 

network of 10 to 50 users. 

The SW-502/SW-802 Fast Ethernet Switch is a Simple and 

cost-effective, highly reliable network switch. And is the ideal device 

for bridging Ethernet to Fast Ethernet workgroups or networks. 

Therefore, the Switches will be the fast being recognized as one of the 

most important building blocks for today networking technology. 

To segment the network, ease the network traffic, the 5/8-port 

10/100Mbps are useful for the SOHO switched networks as the 

friendly network backbone. Provides array LED indicators, the 

network status can be monitored at a glance.   

2.1.1 Product Overview 

PLANET SW-502/SW-802 are Fast Ethernet switches with 5/8 RJ-45 

10/100 Mbps ports for high-speed network connectivity. The switches 

can also automatically identify and determine the correct transmission 

speed and half/full duplex mode of the attached devices with its 5/8 

ports.  

Summary of Contents for SW-502




















Reviews: