consider using UPS (Uninterrupted Power Supply) for your device.
It will prevent you from network data loss or network downtime.
2.
In some area, installing a surge suppression device may also
2.
ur Fast Ethernet Switch and make
Note:
This switch does not need software configuration.
2.2.1 Desktop Installation
To install the switch on desktop, simply follow the next steps:
Step1:
Attach the rubber feet to the recessed areas on the bottom of
Step2:
Place the switch on desktop near a DC power source.
Step3:
Keep enough ventilation space between the switch and the
Note:
When choosing a location, please keep in mind the
Step4:
Connect your switch to network devices.
le to the
devices such
help to protect your switch from being damaged by unregulated
surge or current to the Switch or the power adapter.
2 Installing the Switch
This part describes how to install yo
connections to it. Please read the following topics and perform the
procedures in the order being presented.
the switch.
surrounding objects.
environmental restrictions discussed in Chapter 1, Section 1.4
Product Specification.
A.
Connect one end of a standard network cab
10/100/1000 RJ-45 ports on the Back of the switch.
B.
Connect the other end of the cable to the network
as printer servers, workstations or routers…etc.
