32-Channel Network Video Recorder
NVR-3210/NVR-3250/NVR-3280
69
Configurati
Chapter 9. NVR Setup -- Event
on
9.1 Event Sources
The “Event sources” section allows users to define conditions that constitute an event, its
corresponding trigger action and when it will be triggered. Such setting can reduce the
management overhead and notify the administrator only when it’s necessary.
The 1st step is to define the condition to trigger event; we can finish up the event triggers by
setting:
z
Which channels will have event trigger function enabled?
z
What is considered to be an event?
Define which system events should trigger the recorder to send out notifications.
Use the checkbox to enable event trigger on the desired channels.