background image

 

32-Channel Network Video Recorder

 

NVR-3210/NVR-3250/NVR-3280 

 

 

34

snapshots are automatically saved to x:\SnapshotFolder ("x" represents the partition where 
Windows is installed, e.g., C:\) 

 

 

If the "3 continuous snapshots" option is chosen, the new window will display snapshots and let 
you view them individually by using the "Prev", "Next" buttons as shown above. 

 

 

-

 

Audio in 

Turn on/off audio of a live video. 

 

-

 

Lens Control 

If this camera could control focus and iris, the button of the selection could be active; otherwise, 
it will be highlighted. There are three selections of focus and iris as shown below.

 

 

 

-

 

Preset Point Controls 

This page focuses on just PTZ camera, and here are some definitions below: 

z

 

Add current position:

 Click this button and current position will be added in the preset 

point selection. 

z

 

Go to preset point:

 Select the preset point and the PTZ camera will move to this 

position. 

z

 

Preset points sequence:

 Click

  and the preset page will display. User can adjust the 

preset point on this page; the other settings will be explained in each chapter. 

Summary of Contents for NVR-3210


























































































Reviews: