Page 78 of 97
To configure the NMS address:-
•
Select action of “Modify” or “New Entry” to call out the details configuration as
shown in figure 3.5.10.2.
Figure 3.5.10.2 NMS address parameter page.
•
Address –
specify the IP address of the NMS server
•
Port –
specify the port of the NMS server which is waiting for the report
•
Interval –
specify the interval of report to NMS server
•
Comments –
additional comments for the entry
•
Active –
Enable or Disable this entry.
•
Press “
Save changes
“ to save the configuration
•
Reboot to enable new settings
Note
1. At Layer 2 mode, the NMS Server IP address is required. Otherwise,
the NMS server can never poll the device information once this Mesh
node existed in the network.
2. At Layer 3 mode, the NMS Server IP address is not required. However,
to make the management more secured, we would suggest to key in at
least one manger’s IP address for secured access.
