Page 25 of 97
3.3.2
Network > WAN
(MAP-3100 only)
WAN (Wide Area Network) are used to connect local area networks (LANs) to other networks
through your ISP (Internet Service Provider). WAN configuration page is shown in Figure
3.3.2.1.
Figure 3.3.2.1: WAN configuration page
To configure WAN:
1.
Choose option either for
Static
,
DHCP
or
PPPoE
.
2.
Click on
“Apply”
button.
3.
If you choose for
Static
option, Static IP configuration page will display as shown in
Figure 3.3.2.2.
Figure 3.3.2.2: Static IP configuration page
Static IP configuration page contains the following parameters:
•
IP
– IP address is a unique address used to identify and communicate with
different device on a computer network utilizing the Internet Protocol standard.
Specify the Static IP address.
•
Netmask
– Specify subnet mask for this IP.
•
