IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
40
-
Parameters
Description
Name
Description of each power outlet.
Power on delay
Set the number of seconds that device waits after a command is
issued before applying power to an outlet.
Power off delay
Set the number of seconds that device waits after a command is
issued before removing power from an outlet.
Sync Port
To be displayed after concatenation is enabled is the setting of the
power outlet to be linked with the power outlet of the concatenated
device.
Default
You may set preset switch status when local power is lost and comes
back again. The statuses from the drop-down list are 1.ON, 2.OFF, 3
Last statuses before power was lost.
4.2.2
Safe Shutdown
This page is for setting the computer device name connected to the power outlet. When users want to
power off the outlet, firstly the computer connected should be shut down, and then switch off the power
within the preset delay time.
Parameters
Description
MAC
Please enter the Computer MAC address; the main function is
computer remote Wake-up On LAN (WOL).
Delay Delivery
After power delay delivery time is enabled, the WOL command is
delivered to computer.
Computer Name
Prior to the execution of safe shutdown, an application should be
installed on the computer. After successful installation and
registration, select the computer to be shut down from the drop-down
list and then it will be displayed on the web page.
