IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
18
-
power switch control and IP; set alarm current
14
Buzzer
15
Alarm Indicating Light
Lights remaining lit
: Alarm has occurred
Slow flashing
: There is current overloading
16
Power Outlet Indicating Light
IPM-8220 Current Panel Operation
When the LCD panel only displays figures and the sign of
"A (AMP)"
, it means total current. Switch
with the
Set button
to show the following sequence:
LCD menu shows total current and current values of branch 1 and branch 2.
Hold the
Set
button
for
3 seconds
(until a
long beep
is heard)
to enter alarm current setting.
Enter
flash
mode
(LCD will flash after entering setting mode;
"S"
and
"W"
will display at the bottom of LCD).
Press the
Set button
to increase the alarm current by
0.5A
in each press.
Hold the
Set
button
for
3 seconds
( until a
"beep"
is heard)
to save the setting.
