IP-based 4/8-port Switched Power Manager Power
IPM-4220 / IPM-8220
-
19
-
Press the
Set button
to show the
voltage
information.
Press the
Set button
to show the maximum current record of all branches (branch 1 and
branch 2).
Hold the
Set button
for
3 seconds
(until a
long beep
is heard) to adjust to a zero
point.
IPM-8220 Power Outlet Panel Operation
When the LCD panel shows figures and
"0"
, the information shown is the
branch circuit power outlet
.
By clicking the
Set button
, the following information will be displayed in sequence:
Press the
Switch button
to
Port 1~8
mode.
Press the
Set button
to show power outlet current.
Hold the
Set button
for
3 seconds
(until a
long beep
is heard) to enter power outlet alarm current setting.
Enter
flash mode
(LCD
will flash after entering setting mode;
"S"
,
"O"
and
"W"
will display at the bottom of LCD).
Press
the
Set button
to increase the alarm current by
0.5A
in each press.
Hold the
Set button
for
3
seconds
(until a
"beep"
is heard)
to save the setting.
Press the
Set button
to show
"maximal power outlet current record"
,
Hold the
Set
button
for
3 seconds
(until a
long beep
is heard)
to adjust to a zero point.
Hold the
Switch button
for
3 seconds
(until a
long beep
is heard) in
Port 1~8
mode.
Enter Power On/Off mode ("L" will be added in front of the original line number).
Double-click the
Set button to switch between power on and off.
When LCD panel displays "
Port 1~8
mode".
Hold the
Switch button
for
3 seconds
(until a
long beep
is heard) till "
LOC
" displayed. It means this circuit power is locked and cannot be
