Planet Internet Telephony PBX System IPX-300 Series User Manual Download

Page: 93 / 96

vm-reachoper.WAV:

press 0 to reach an operator

vm-rec-busy.WAV:

After the tone say your busy message and then press the pound key.

vm-received.WAV:

received

vm-rec-name.WAV:

After the tone say your name and then press the pound key.

vm-rec-temp.WAV:

After the tone, say your temporary message, and then press the pound key

vm-rec-unv.WAV:

After the tone say your unavailable message and then press the pound key

vm-reenterpassword.WAV:

Please re-enter your password followed by the pound key

vm-repeat.WAV:

Press 5 to repeat the current message

vm-review.WAV:

press 1 to accept this recording press 2 to listen to it press 3 to rerecord your

messagevm-saved.WAV:

saved

vm-savedto.WAV:

saved to

vm-savefolder.WAV:

Which folder should I save the message to?

vm-savemessage.WAV:

or 9 to save this message

vm-saveoper.WAV:

press 1 to accept this recording, otherwise, please continue to hold

vm-sorry.WAV:

I'm sorry I did not understand your response

vm-star-cancel.WAV:

press star to cancel

vm-starmain.WAV:

press star to return to the main menu

vm-tempgreetactive.WAV:

Your temporary greeting is currently active

vm-tempgreeting2.WAV:

press 1 to record your temporary greeting, or press 2 to erase your

temporary greeting

vm-tempgreeting.WAV:

press 1 to record your temporary greeting

vm-tempremoved.WAV:

Your temporary greeting has been removed

vm-then-pound.WAV:

then press pound

vm-theperson.WAV:

The person at extension

vm-tocallback.WAV:

press 2 to call the person who sent this message

vm-tocallnum.WAV:

press 1 to call this number

vm-tocancel.WAV:

or pound to cancel

vm-tocancelmsg.WAV:

press star to cancel this message

vm-toenternumber.WAV:

press 1 to enter a number

vm-toforward.WAV:

Press 8 to forward the message to another user

vm-tohearenv.WAV:

press 3 to hear the message envelope

vm-tomakecall.WAV:

press 4 to place an outgoing call

vm-tooshort.WAV:

your message is too short

vm-toreply.WAV:

press 1 to send a reply

vm-torerecord.WAV:

press 3 to rerecord your message

vm-undelete.WAV:

Press 7 to undelete this message.

vm-undeleted.WAV:

Message undeleted

vm-unknown-caller.WAV:

from an unknown caller

vm-whichbox.WAV:

To leave a message, please enter a mailbox number.

vm-Work.WAV:

work

Summary of Contents for Internet Telephony PBX System IPX-300 Series

































































































Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands

Planet Internet Telephony PBX System IPX-300 Series, User Manual

Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands