Planet Internet Telephony PBX System IPX-300 Series User Manual Download

Page: 56 / 96

LAN network. Depending on the requested service (TCP/UDP port number), the device redirects the

external service request to the appropriate server within the LAN network. You will only need to input

the LAN IP address of the computer running the service and enable it.

A Virtual Server is defined as a service port, and all requests to this port will be redirected to the

computer specified by the server IP.

Figure 4-27. Virtual server mapping settings

Enable

Enable/Disable the virtual server mapping, default setting is Disable.

WAN Port

The port number on the WAN side that will be used to access the

virtual service. Enter the WAN Port number, e.g. enter 80 to

represent the Web (http server), or enter 25 to represent SMTP

(email server). Note: You can

specify maximum 32 WAN Ports.

Protocol

The protocol used for the virtual service. Select a protocol type is

TCP or UDP.

LAN IP

The server computer in the LAN network that will be providing the

virtual services. Enter the IP address of LAN.

LAN Port

The port number of the service used by the Private IP computer.

Enter the LAN port number.

Action

Insert a new WAN port or update a specified WAN port.

Table 4-11. Virtual server mapping description

Port Trigger

Some applications require multiple connections, such as Internet gaming, video conferencing, Internet

telephony and others. These applications have difficulties working through NAT (Network Address

Translation). If you need to run applications that require multiple connections, specify the port normally

associated with an application in the "Trigger Port" field, select the protocol type as TCP (Transmission

Control Protocol) or UDP (User DIP-PBXgram Protocol), then enter the public ports associated with the

trigger port to open them for inbound traffic.

Summary of Contents for Internet Telephony PBX System IPX-300 Series

































































































Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands

Planet Internet Telephony PBX System IPX-300 Series, User Manual

Search results

Summary of Contents for Internet Telephony PBX System IPX-300 Series

Reviews:

Related manuals for Internet Telephony PBX System IPX-300 Series

Brands by name

Popular brands